- Products description -

SFP BIDI 3.072G 1310/1550nm(1550/1310nm)DDM 3KM Transceiver Small Form Factor Pluggable(SFP)transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement(MSA),The transceiver consists of five sections:the LD driver,the limiting amplifier,the digital diagnostic monitor,the 1310nm FP laser(the 1490nm DFB laser)and the PIN photo-detector.The module data link up to 3KM in 9/125um single mode fiber.The optical output can be disabled by a TTL logic high-level input of Tx Disable,and the system also can disable the module via I2C.Tx Fault is provided to indicate that degradation of the laser.Loss of signal(LOS)output is provided to indicate the loss of an input optical signal of receiver or the link status with partner.The system can also get the(orLink)/Disable/Fault information via I2C register access.

 - Product Features -

1．Up to 3.072Gb/s data links
2．DFB laser transmitter and PIN photo-detector
3．Up to 3km on 9/125?m SMF
4．Hot-pluggable SFP footprint
5．BIDI LC/UPC type pluggable optical interface
6．Low power dissipation
7．Metal enclosure,for lower EMI
8．RoHS compliant and lead-free
9．Single+3.3V power supply
10．Support Digital Diagnostic Monitoring interface
11．Compliant with SFF-8472
12．Case operating temperature
13．Commercial:0°C to+70°C
14．Extended:-10°C to+80°C
15．ndustrial:-40°C to+85°C

Table 1-Optical and Electrical Characteristics

NOTE:

1.The optical power is launched into SMF.

2.PECL input,internally AC-coupled and terminated.

3.Measured with a PRBS 27-1 test pattern@1250Mbps,BER ≤1×10-12.

4.Internally AC-coupled.

Paremeters 

Ordering information