Optic Transceiver Module-QSFP+ 40G SR4 100m

- Products description -

Sharetop’s QSFP+_40G_SR4_100m transceiver is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth.one version is Each lane can operate at 10.5Gbps up to100m using OM3 or 150m using OM4 Multimode fiber,another version is Each lane can operate at 10.5Gbps up to300m using OM3 or 400m using OM4 Multimode fiber These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

- Product Features -

1. Supports 1.06 to 10.5Gb/s bit rates per Channel

2. Four-Channel ,1x12 MPO receptacle

3. Hot pluggable QSFP+ form factor

4. VCSEL 850nm array Technology

5. Applicable for 100m&300m on OM3 MMF,150m&400m on OM4 MMF.

6. Built-in digital diagnostic functions

7. Low power consumption, < 1.5W

8. Unretimed XLPPI electrical interface

9. Operating case temperature: -5°C to 80 °C

- Product Specification -

1. 40GBASE-SR4 40G Ethernet

2. Datacom/Telecom switch & router connections

3. Data Aggregation and Backplane Applications

4. Proprietary Protocol and Density Applications

5. Infiniband transmission at 4CH SDR, DDR and QDR

6. Other optical links

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 80 ℃,VCC = 3.13 to 3.47 V)

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Operating Wavelength	λ	840	850	860	nm
Ave. output power (Enabled)	PAVE	-7.5		+2.5	dBm
Difference in launch power between any two lanes (OMA)	DL			4	dB
Extinction Ratio	ER	3			dB
Peak power, each lane	PP			4	dBm
Dispersion penalty, each lane	TDP			3.5	dB
Average launch power of OFF transmitter, each lane	POFF			-30	dB
Eye Mask coordinates: X1, X2, X3, Y1, Y2, Y3	SPECIFICATION VALUES 0.23, 0.34, 0.43, 0.27, 0.35, 0.4					Hit Ratio = 5x10-5
Receiver
Operating Wavelength	λc	840	850	860	nm
Stressed receiver sensitivity in OMA(OLSQ854XM-CDS1)	PSEN1			-5.4	dBm	3
Stressed receiver sensitivity in OMA(OLSQ854XM-CDS3)	PSEN2			-7.5	dBm	3
Average Receive Power,each lane	PAVE	-11		+2.4	dBm
Receiver Reflectance	Rrx			-12	dB
LOS Assert	Pa	-30			dBm
LOS De-assert	Pd			-9	dBm
LOS Hysteresis	Pd-Pa	0.5			dB

Notes:

1. Measured with conformance test signal at TP3 for BER = 10^-12Receiver Characteristics

Ordering Information

Part Number	Description
XYT-QSFP+_40G_SR4_100m	QSFP+,40Gb/s, 850nm, 100m, 0~70℃ MPO
XYT-QSFP+_40G_SR4_100m	QSFP+,40Gb/s, 850nm, 300m, 0~70℃ MPO

	对非因人为或使用不当等原因造成的产品损坏承诺一年保修，终身维护，私自拆装设备造成损坏不在保修和退换范围之内。
	在正常使用情况下，如存在产品质量问题，不能正常工作，一年内提供免费维修或更换服务；一年以上三年以内提供收材料成本费，免维修费的保修服务。三年质保期内的维修往返运费由双方各自承担。三年质保期后提供收材料成本费、维修费、运费（指产品往返的双向运费）的维修服务产生的费用由用户本人承担。
	我方承诺我方提供之产品能满足用户生产产品的各项性能要求,且是按用户咨询样品要求供货.

暂无文档